General Lubrication; Auger Shaft Greasing; Service Parts - Ariens Sno-Thro 932036-524 Owner's Manual

2.Add lubricant ifrequired. Allow oil t odrain
tolevel ofplug a nd replace plug.
IMPORTANT: Use only A riens special gear
lubricant L-2 (Part Number 00008000).
1.Auger Gearcase
2.Filler Plug
2
0S1830
Figure 9
GENERAL LUBRICATION
IMPORTANT: Wipe each fitting clean before
and after lubrication.
IMPORTANT: DO NOT allow grease or oil to
get on friction disc, friction plate or belts.
NOTE: Apply Stens Mix Hi-Temp Grease or
equivalent to the lubrication fittings. See
Service Parts.
Sno-Thro should be lubricated (Figure 10) at
beginning of season or every 25 operating
hours.
Auger Shaft
NOTE: To grease auger shaft, remove shear
bolt nuts, and shear bolts. Turn auger on shaft
while applying grease at zerk fittings. Replace
shear bolt per instructions in Service and
Adjustments.
= i
\
Grease Oil
Figure 10
OS1373
GB- 19