Using The Video Setup; Dvd Audio - Denon DVD-3910 Operating Instructions Manual

Denon dvd audio-video/super audio cd player dvd-3910 operating instructions
Hide thumbs Also See for DVD-3910:
Table of Contents

Advertisement

12 USING THE VIDEO SETUP

2 The video output setting of the HDMI and the DVI-D connectors can be changed.
2 The video output setting of the PICTURE MODE, PROGRESSIVE MODE and ADJUST MODE also can be changed.
ON / STANDBY
DENON LINK
AL 24 PLUS
Display the setting mode
The HDMI, DVI, 480P, 576P, 720P and 1080i indicators flash when the
connection is being checked, then stop flashing, remaining lit, once the
check is completed.
Press the HDMI/DVI SELECT button.
• The modes described below will appear on the display.
HDMI/DVI OFF (Factory default)
No output signals from the HDMI and DVI-D
connectors.
This mode is set to use the COMPONENT VIDEO
OUT connector.
HDMI Y Cb Cr
1
Outputs the component signals from the HDMI
connector.
HDMI RGB
Outputs the RGB signals from the HDMI connector.
DVI
Outputs the RGB signals from the DVI-D connector.
The video signals are only output from one of the
HDMI, DVI or progressive component video output
connectors.
Press the HDMI/DVI FORMAT button.
• The modes described below will appear on the display.
Select the item you wish to set and press the select
knob to define it.
480P/576P (Factory default)
Outputs the image from the HDMI or DVI-D connector
at 480P or 576P.
720P
Outputs the image from the HDMI or DVI-D connector
at 720P.
1080i
Outputs the image from the HDMI or DVI-D connector
2
at 1080i.
• When playing back a PAL-formatted disc, be sure to
set the TV TYPE option to NTSC. (See pages 36, 37)
• The video or audio signals may be interrupted when
the output setting mode is switched.
• Depending on the TV you are using, if the TV's input
is not set to HDMI or DVI, the HDMI or DVI OFF
mode may be set. In this case, set the TV's input
setting to HDMI or DVI before performing the DVI
setup procedure.
• Connect to an HDCP compatible display to view
images with DVI connections.
OPEN/CLOSE
PLAY
STOP
STILL / PAUSE
VIDEO MODE
HDMI / DVI
SUPER
PURE
SELECT
FORMAT
AUDIO CD
DIRECT
SETUP
SELECT
PUSH ENTER
DVD-3910
DVD AUDIO-VIDEO / SUPER AUDIO CD PLAYER
1 2
3, 4
HDMI / DVI
SELECT
FORMAT
Main unit
HDMI/DVI
SELECT
FORMAT
Remote control unit
HDMI / DVI
SELECT
FORMAT
Main unit
HDMI/DVI
SELECT
FORMAT
Remote control unit
1 2
HDMI/DVI OFF
HDMI Y Cb Cr
HDMI R G B
DVI
480P/576P
720P
1080i
ENGLISH
53

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dvd-3910bEb-817

Table of Contents