Fiery On A Netware Network With Ndps - Oki C9800hdn Configuration Manual

2

2-13 Fiery on a NetWare network with NDPS

For printing to the Fiery, connect all Windows clients to a NetWare server and
N :
OTE
permit them to connect to the Netware print server or servers on which you defined a
NetWare print queue for the Fiery.
After the Novell server and the Fiery have been set up, client setup consists of:
• Installing the networking protocol, binding it to the network adapter card, and
permitting the client to log in to the NetWare file server.
On Windows 98/Me workstations, load both the IPX/SPX-compatible protocol and
the Client for NetWare Networks from the Network Control Panel.
On Windows NT 4.0/2000/XP/Server 2003 workstations, install Client Services for
NetWare. Use the CSNW option in the Control Panel to set printing options and
specify a preferred NetWare server.
• Setting up the Fiery as a PostScript printer by installing a PostScript printer driver
and the Fiery PPD (PostScript printer description).
• Adding a network port and connecting the workstation to one or more NetWare
queues that have been defined for the Fiery.
• Installing Fiery software, such as color reference files.
For details, see the User Software Installation Guide.
Fiery on a NetWare network with NDPS
The Fiery supports printing over a NetWare 5.x or later network running either the
TCP/IP protocols or the IPX protocol. For pure IP printing, the Fiery takes advantage
of features in NDPS (Novell Distributed Print Services). For IPX printing, the Fiery
supports the PServer service in Bindery emulation or through NDS (Novell Directory
Services). For more information on IPX-based printing, see
network" on page 2-8.
Setting up a NetWare environment correctly requires the presence and active
N :
OTE
cooperation of the Novell network administrator. You must have administrator
privileges on the network to create new NDS or bindery objects.
"Fiery on a NetWare