Chapter 5: Setting Up The Fiery From A Windows Computer; Accessing Setup; Remote Fiery Setup - Oki C9800hdn Configuration Manual

5

5-1 Accessing Setup

Chapter 5:
Setting up the
Fiery from
a Windows
Computer
T
O ACCESS
1. Start your Internet browser and enter the IP address of the Fiery.
2. Log in as Administrator.
3. When the Fiery home page appears, click WebSetup.
After you perform initial Setup (Server, Network, and Printer Setup) from the Control
Panel, you can change most Setup options from a Windows computer.
Accessing Setup
In addition to using the Control Panel, you can set up the Fiery remotely. You can
perform remote Setup from a Windows computer using Command WorkStation.
To use the Setup applications (Command WorkStation), you must enter the Fiery
Administrator password. This is set either from the local Setup at the Printer Control
Panel, or remote Setup from Command WorkStation.

Remote Fiery Setup

Remote Setup is performed from a Windows computer using Command WorkStation.
W S
EB ETUP