5
5-7 Network Setup
Adapters/Ports
Ethernet (Port Setup)
. —Select to connect the Fiery to an Ethernet network.
Enable Ethernet
. —Choose Auto Detect if your network environment is mixed, or
Transmission Speed
choose the speed of the network to which the Fiery is attached (10 Mbps or
100 Mbps).
Parallel Port (Port Setup)
Enable Parallel Port. —Specify whether you want to print through the parallel port.
You can connect a single Windows computer to the parallel port and print directly to
the Fiery.
Enabling the parallel port does not conflict with using Ethernet communication
N
:
OTE
with the Fiery.