Clearing The Fiery; Managing Address Books - Oki C9800hdn Configuration Manual

7

7-5 Clearing the Fiery

T
O SET OR CHANGE A PASSWORD
1. Select the password you want to change.
2. Type the password in both the Enter New Password and Verify New Password fields.
Passwords are case-sensitive and can be any combination of letters and numbers up to
19 characters. You must enter the password exactly the same way both times. The new
password remains in effect until you change it.
Caution: If you decide to set an administrator password make sure you keep a
careful note of it. If you lose or forget this password it cannot be
recovered for you, and the internal hard disk drive containing the
operating system and all settings will need to be replaced.
T
O REMOVE A PASSWORD
1. Select the password you want to delete.
2. Delete the asterisks (*) in both the Enter New Password and Verify New Password
fields.
Clearing the Fiery
The Clear Server command allows you to clear all queued print jobs from the Fiery—
jobs in the Fiery Print, Hold, and Printed queues. Jobs can also be deleted, either
individually or as a group, using the job management tools. Clear Server also clears all
jobs archived on the Fiery hard disk, the index of archived jobs, all Fiery FreeForm
masters, and the index of Fiery FreeForm masters.
To clear the Fiery, scroll through the Setup menu and choose Clear Server. You are
asked to confirm your selection. If the Administrator password has been set, you are
prompted to enter it.

Managing address books

The E-mail Service feature allows an administrator to import a list of e-mail addresses
to the Fiery by sending e-mail messages to the Fiery.
E-mail messages can be sent only from an administrator account.
N :
OTE