Oki C9800hdn Configuration Manual page 31

2
2-7 Fiery on a TCP/IP network with Windows NT 4.0/2000/XP/Server 2003/Server 2003
Use the information on this page to determine the current Fiery settings.
• Load the TCP/IP network protocol on the computer.
Windows 98/Me: Load File and printer sharing for Microsoft Networks.
Windows 2000/XP: Load Client for Microsoft Networks.
• In the Windows Network Control Panel, verify the Workgroup name of the computer.
Make sure that the Workgroup name is the same as the one listed in Fiery Setup.
• Windows 98/Me: In the File and printer sharing for Microsoft Network Properties
dialog box, specify Automatic or Enabled for Browse Master, and select Yes for
LM Announce.
Windows 2000/XP: In the Client for Microsoft Networks Properties dialog box,
configure the computer to allow file sharing, and then restart the computer.
• Ping the Fiery to verify TCP/IP communication is successful (see
• Insert the C9800 Driver CD and wait for it to autorun.
If the CD does not start automatically, click [Start]→ [Run] and enter E:\Setup (where
E is your CD-ROM drive) in the Open field, then click on [OK].
page 2-19).