Oki C9800hdn Configuration Manual page 24

1
1-12 Connecting to the Network
The Fiery can accept print jobs from a Windows computer through its high-speed
parallel port. This connection is advantageous for portable computers and for
workstations on dedicated networks using protocols other than AppleTalk, TCP/IP,
or IPX.
The parallel port connection can be active at the same time as the network ports.
The parallel port cannot be used to connect the Fiery with
N :
OTE
Command WorkStation or other Fiery utilities.
T USB
O USE PARALLEL OR
1. With the C9800 and the Windows computer turned off, attach the parallel or USB cable
to the parallel or USB port of the printer.
For the location of the parallel and USB ports, see the illustration on
2. Connect the other end of the cable to the parallel or USB port on the Windows com-
puter.
3. Turn on the computer and the C9800.
4. Proceed to Setup.
CABLE
page 1-11.