Oki C9800hdn Configuration Manual page 77

4
4-25 Network Setup options
Network Setup
Service Setup
PServer Setup
Bindery Setup
Add File Server
This option gives you two ways to add a Novell NetWare file server.
Select File Server
From List/Search by Name [From List]
You may select the file server from a scrollable list, or by a name search.
Choose From List if your network does not have a large number of file servers.
Choose Search by Name if the number of file servers is so large that scrolling through
the list would take a long time.
If you selected :
From List
Add Server
List of all servers
The Fiery obtains a list of NetWare file
servers by querying the IPX network. Use
the up and down arrow buttons to select
a NetWare file server from the list.
Choose the server on which you have
configured a print server and print queue
to handle Fiery print jobs.
Once you have chosen a file server, the Fiery immediately tries to log in as a guest
without a password. If it succeeds, it skips to the NetWare Print Server option.
If you try to add a file server but all Fiery connections are already in use, you are
prompted to remove a file server (see
If you selected
Search by Name
Enter First Letters of Server Name
Use the up and down arrow buttons to
enter the first letters of the name of the
file server you want to use, and then press
Enter.
Add Server
List of servers matching the search
This option is displayed if you entered
letters to search. Scroll through the list to
select the server you want.
"Remove File Server" on page 4-28).
: