Table 38 Implicit Ip Filter Rules; Table 39 Default Ip Policy Rules - HP StoreFabric SN6500B Administrator's Manual

Fabric os administrator's guide, 7.1.0 (53-1002745-02, march 2013)

Hide thumbs Also See for StoreFabric SN6500B:

Table of Contents

IP Filter policy

Traffic type and destination IP

The traffic type and destination IP elements allow an IP policy rule to specify filter enforcement for

IP forwarding. The INPUT traffic type is the default and restricts rules to manage traffic on IP

management interfaces,

The FORWARD traffic type allows management of bidirectional traffic between the external

management interface and the inband management interface. In this case, the destination IP

element should also be specified.

Implicit filter rules

For every IP Filter policy, the two rules listed in

implicitly to the end of the policy. This ensures that TCP and UDP traffic to dynamic port ranges is

allowed, so that management IP traffic initiated from a switch, such as syslog, radius and ftp, is not

Source address

Default policy rules

A switch with Fabric OS v6.2.0 or later will have a default IP Filter policy for IPv4 and IPv6. The

default IP Filter policy cannot be deleted or changed. When an alternative IP Filter policy is

activated, the default IP Filter policy becomes deactivated.

Filter policy.

Implicit IP Filter rules

Destination port

Default IP policy rules

Source address

Destination port

are always assumed to be appended

lists the rules of the default IP

Fabric OS Administrator's Guide

53-1002745-02

Show Quick Links

Table of Contents

Fabric os 7.1.0