Deleting Ee Monitors; Displaying Ee Monitor Counters; Figure 65 Mask Positions For End-To-End Monitors - HP StoreFabric SN6500B Administrator's Manual

20
End-to-end performance monitoring
The perfSetPortEEMask command sets a mask for the domain ID, area ID, and AL_PA of the SIDs
and DIDs for frames transmitted from and received by the port.
Figure 65
compare the AL_PA fields on the SID and DID in all frames (transmitted and received) on port 2.
The frame SID and DID must match only the AL_PA portion of the specified SID and DID pair. Each
port can have only one EE mask. The mask is applied to all end-to-end monitors on the port.
Individual masks for each monitor on the port cannot be specified.
perfsetporteemask 1/2, "00:ff:ff" "00:ff:ff" "00:ff:ff" "00:ff:ff"
FIGURE 65

Deleting EE monitors

1. Connect to the switch and log in using an account with admin permissions.
2. Enter the perfMonitorShow command to list the valid end-to-end monitor numbers for a port.
3. Enter the perfDelEEMonitor command to delete a specific monitor.
Example
The following example displays the end-to-end monitors on port 0 (the monitor numbers are listed
in the KEY column) and deletes monitor number 2 on port 0:
switch:admin> perfmonitorshow --class EE 0
There are 4 end-to-end monitor(s) defined on port
KEY SID DID
--------------------------------------------------------------------------------------
0 0x000024 0x000016
1 0x000022 0x000033
2 0x000123 0x000789
3 0x001212 0x003434
switch:admin> perfdeleemonitor 0, 2
End-to-End monitor number 2 deleted

Displaying EE monitor counters

You can use this procedure display the end-to-end monitors on a specified port. You can display
either the cumulative count of the traffic detected by the monitors or a snapshot of the traffic at
specified intervals.
1. Connect to the switch and log in using an account with admin permissions.
2. Enter the perfMonitorShow command.
504
shows the mask positions in the command. A mask ("ff") is set on slot 1, port 2 to
Mask positions for end-to-end monitors
If you do not specify which monitor number to delete, you are asked if you want to delete all
entries.
OWNER_APP TX_COUNT
WEB_TOOLS 0x0000000000000000
WEB_TOOLS 0x0000000000000000
WEB_TOOLS 0x0000000000000000
WEB_TOOLS 0x0000000000000000
Transmitted from port
SID mask DID mask
AL_PA mask
Area ID mask
Domain ID mask
0.
RX_COUNT
0x0000000000000000
0x0000000000000000
0x0000000000000000
0x0000000000000000
Received by port
SID mask DID mask
OWNER_IP_ADDR
10.106.7.179
10.106.7.179
10.106.7.179
10.106.7.179
Fabric OS Administrator's Guide
53-1002745-02