Deleting A Zone Object - HP StoreFabric SN6500B Administrator's Manual

11
Zone object maintenance
4. Enter the cfgShow command to verify the new zone object is present.
5. If you want the change preserved when the switch reboots, use cfgSave to save it to nonvolatile
6. Use cfgEnable for the appropriate zone configuration to make the change effective.

Deleting a zone object

The following procedure removes all references to a zone object and then deletes the zone object.
The zone object can be a zone member, a zone alias, or a zone.
Use the following procedure to delete a zone object:
1. Connect to the switch and log in using an account with admin permissions.
2. Enter the cfgShow command to view the zone configuration objects you want to delete.
3. Use zone --expunge to delete the zone object.
334
switch:admin> cfgshow "Test*"
cfg: Test1
cfg: Test_cfg
switch:admin> cfgShow "US_Test1"
cfg: US_Test1
(flash) memory.
switch:admin> cfgShow
Defined configuration:
cfg: USA_cfg Purple_zone; White_zone; Blue_zone
zone: Blue_zone
1,1; array1; 1,2; array2
zone: Purple_zone
1,0; loop1
zone: White_zone
1,3; 1,4
alias: array1 21:00:00:20:37:0c:76:8c; 21:00:00:20:37:0c:71:02
alias: array2 21:00:00:20:37:0c:76:22; 21:00:00:20:37:0c:76:28
alias: loop1 21:00:00:20:37:0c:76:85; 21:00:00:20:37:0c:71:df
Effective configuration:
cfg: USA_cfg
zone: Blue_zone
1,1
21:00:00:20:37:0c:76:8c
21:00:00:20:37:0c:71:02
1,2
21:00:00:20:37:0c:76:22
21:00:00:20:37:0c:76:28
zone: Purple_zone
1,0
21:00:00:20:37:0c:76:85
21:00:00:20:37:0c:71:df
NOTE
Zone configuration names are case-sensitive, blank spaces are ignored and the
zone --expunge command works in any Admin Domain except AD255.
switch:admin> zone --expunge "White_zone"
Blue_zone
Purple_zone; Blue_zone
Blue_zone
Fabric OS Administrator's Guide
53-1002745-02