Brocade 7800 Upgrade License - HP StoreFabric SN6500B Administrator's Manual

18

Brocade 7800 Upgrade license

TABLE 70
Feature
Speed
SSH public key
TACACS+
Top Talkers
Traffic Isolation
Trunking
Two-to-four domains in a
fabric
USB usage
Virtual Fabrics
Web Tools
Zoning

Brocade 7800 Upgrade license

The Brocade 7800 has four Fibre Channel (FC) ports and two GbE ports active by default. The
number of physical ports active on the Brocade 7800 is fixed. There is one upgrade license to
activate the rest of the FC and GbE ports for a total of 16 FC ports and 6 GbE ports. The 7800
Upgrade license activates FC and GbE ports, and also activates additional features outlined in
Table
NOTE
You must reboot the Brocade 7800 switch after installing the 7800 Upgrade license.
TABLE 71
Feature
Number of Fibre Channel (FC) ports
Number of GbE ports
Number of 10-GbE ports
470
License requirements and location name by feature (Continued)
License
8 Gbps license needed to support 8 Gbps on
the Brocade 300, 5100, 5300, and VA-40FC
switches and embedded switches only.
NOTE: The 8 Gbps license is installed by
A 10-Gb FCIP/Fibre Channel license is needed
to support 10Gb FC ports on FC16-32 blades,
FC16-48 blades, and the Brocade 6510 and
6520, as well as to support the 10Gb Ethernet
ports on FX8-24 blades. (See the Ports feature
above for more information.)
No license required.
No license required.
Advanced Performance Monitoring
No license required.
•
ISL Trunking or
•
ISL Trunking Over Extended Fabric
Value Line (Two/Four)
No license required.
No license required.
No license required.
No license required.
71.
Base to Upgrade license comparison
default, and you should not remove it.
Base model
4
2
0
Where license should be installed
Local switch
N/A
N/A
Local switch and attached switches.
N/A
Local and attached switches.
s
Local switch. May be required on
attached switches.
N/A
N/A
Local and any switch you will be
managing using Web Tools.
N/A
7800 Upgrade license
16
6
0
Fabric OS Administrator's Guide
53-1002745-02