To Set Barcode Filters For A Job; Filter Rules - HP BB118BV - StorageWorks Data Protector Express Package Addendum

22

To set barcode filters for a job

Barcode filters may easily be assigned from the Job Properties. (If you are using a wizard
to create the job, you must edit the properties after the job has been created.) Select the
Barcode Filter page.
All options will be grayed out initially. Deselect Inherit settings from domain if you want
to create job-specific filters.
Click Add to create a new filter. There are three types of filter rules, which are described
below.

Filter rules

There are three ways of assigning barcode filters.
• Add an individual barcode. This option allows you to specify an individual
barcode for inclusion or exclusion. Up to 8 characters may be specified in this
filter; the first 6 relate to the volume identifier and the last 2 relate to the media
identifier. Wildcards may be used to increase the number of barcodes selected by
the filter.
Viewing a Tape Library