Admin Domains, Zones, And Zone Databases - HP StoreFabric SN6500B Administrator's Manual

17
SAN management with Admin Domains
TABLE 67
Fabric OS feature
FDMI
FICON
iSCSI
LSAN zoning
Management
applications
Port swapping and PID
formats
RSCN
Virtual Fabrics
Zoning

Admin Domains, zones, and zone databases

Admin Domains introduce two types of zone database nomenclature and behavior:
•
•
458
Admin Domain interaction with Fabric OS features (Continued)
Admin Domain interaction
FDMI operations are allowed only in AD0 and AD255.
Admin Domains support FICON. However, you must perform additional steps because
FICON management requires additional physical control of the ports. You must set up the
switch as a physical member of the FICON AD.
Device Connection Control (DCC) and Switch Connection Control (SCC) policies are
supported only in AD0 and AD255, because ACL configurations are supported only in
AD0 and AD255.
iSCSI operations are supported only in AD0.
Refer to
Management interfaces that access the fabric without a user's credentials continue to
get the physical fabric view. Examples include SNMPv1, Web Tools, HTTP access,
unzoned management server query, FAL in-band CT requests from FAL Proxy to FAL
Target, and FC-CT-based management applications.
Access from applications or hosts using management server calls can be controlled
using the management server ACL support provided by the msConfigure command. Note
that this is a switch-specific setting and not a fabric-wide setting.
Admin Domain port members are specified in domain,index format. Based on the PID
format, a domain,index member indicates a slot and port in the switch. The
domain,index member is effectively a member of that AD.
Port swapping has no effect on AD support as port swapping swaps only the area
numbers of two ports and Admin Domains are specified using domain,index members.
For detailed information about configuring the PID format, refer to
"Performing Advanced Configuration
Admin Domains do not introduce any RSCN changes to devices or hosts.
Virtual Fabrics and Admin Domains are mutually exclusive and are not supported at the
same time on a switch. To use Admin Domains, you must first disable Virtual Fabrics; to
use Virtual Fabrics, you must first delete all Admin Domains.
If you connect a switch with Admin Domains to a Virtual Fabrics-enabled switch, the link
is segmented with the reason "VF AD conflict."
Refer to
Root zone database
If you do not use Admin Domains, there is only one zone database. This legacy zone database
is known as the root zone database. If you create Admin Domains, several zone databases
exist: the root zone database, which is owned by AD0, and other zone databases, one for each
user-defined Admin Domain.
AD-level zone information is merged with the root zone configuration and enforced.
AD zone databases
Each AD (AD1 through AD254) has its own zone database, with the defined and effective zone
configurations and all related zone objects (zones, zone aliases, and zone members). Each AD
has its own zone transaction buffer. Within an Admin Domain, you can configure zoning only
with the devices that are present in that Admin Domain.
"Admin Domains and LSAN zones"
Tasks".
"Admin Domains, zones, and zone databases"
on page 459 for details.
Chapter 3,
on page 458 for details.
Fabric OS Administrator's Guide
53-1002745-02