Status (Tape Attach) - HP StorageWorks D2D - Backup Systems User Manual

Day:
Time:
Active:
Eject Physical Cartridge:
Verify:

Status (Tape Attach)

This page displays the status of any current tape import, export or copy operations.
• If no such operations are currently in progress, a link will be provided to the Tape Attach Job
History page.
• If a job is in progress, it shows job mode (copy, export or import), HP D2D library device, cartridge
barcode, start time, duration, verify and data size. The final column shows the Job Status. If the
job is running, this will include a progress bar for all relevant activities in the operation, such as
copy and verify (if requested). This column also shows any error or information messages.
168 Using Tape Attach
This field is not relevant for Daily jobs and After Write jobs. For Weekly jobs, select
the day of the week. For Monthly by day, select a day between 1 and 31. For
months with less than 31 days, the job is always run on the last day of the month.
For Weekday of the Month, select First/Second/Third/Fourth/Last week and then
the day of the week.
This field is not relevant for After Write jobs. It is the time at which the job is to run:
hour (24-hour clock) and minute.
Use this check box to control whether a schedule is active. The default is active
(box is checked).
This checkbox allows you to control whether the cartridge is unloaded from the
physical tape device once the scheduled job completes. The default is not to eject
the physical cartridge. If the attached device is a library the tape will be moved
to the mail slot if there is an empty mail slot.
This determines how the data that has been created on the physical cartridge is to
be verified with the original data on the HP D2D Backup system. There are three
options: None, Quick and Full. The default is Full.