Discovery Tab; Targets Tab; Discovery Tab (Iscsi); Add Target Portal - HP StorageWorks D2D - Backup Systems User Manual

Discovery tab

Figure 27 Discovery tab (iSCSI)
Click Add to enter target portals that will enable discovery of the device.
Figure 28 Add target portal
You must enter the IP address or fully qualified domain name of the HP D2D Backup System (for
example, myhpd2d.mydomain.com) to add it as a target portal for the host on the Discovery tab. Do
not change the Port; it should be 3260.

Targets tab

This tab contains a list of all available devices.
• If this is the first time that the iSCSI Initiator has been configured and the Installation wizard has
not been run, it will automatically create a library with the appropriate number of target devices
(the default is one loader and one tape drive).
• If target devices have already been configured for the host in the past, they appear in the list; no
more are created.
D2D Backup System HP D2D4112 61