Replication Licensing; Replication Licensing; Before You Start; Many To One Replication Example - HP StorageWorks D2D - Backup Systems User Manual

Office A
Host A1
Backup/
Backup
SW
Restore
Host A2
Backup/
Backup
SW
Restore
Office B
Host B1
Backup/
Backup
SW
Restore
Host B2
Backup/
Backup
SW
Restore
Figure 44 Many to one replication example

Replication Licensing

The Replication License is a single software license; it is unique to a single HP D2D Backup System
and is required on every appliance that will be used as a Replication Target. If you wish to replicate
data to multiple HP D2D Backup Systems, you require a separate license for each target appliance,
appropriate to the model type, and must repeat the activation process for each HP D2D Backup
System.
NOTE:
The Replication license can only be used on the model for which it was purchased. For example, the
Replication License for a D2D250x series can only be used on a D2D250x Backup System. It cannot
be used on a D2D4xxx series.

Before you start

To activate your license you must first obtain a permanent License To Use (LTU) from the HP Licensing
website and then use the HP D2D's Web Management Interface to apply the LTU, activate the
replication feature and complete the licensing process. The HP Licensing website will ask you for:
86 Configuring and using replication
D2D Appliance A
Library A1
Replicate
Library A2
D2D Appliance B
Library B1
Library B2
Replicate
Data Centre D
D2D Appliance D
Library D1
Library D2
Library D3