Empty Slots; To Delete A Cartridge; To Write Protect A Cartridge - HP StorageWorks D2D - Backup Systems User Manual

Max Size:
Write Protected:
Delete or Create icon:
Move Cartridge:
Last Written:

Empty slots

Empty slots are slots that contain no cartridges; all the fields are empty.
• Tape drive row: A library consists of two devices; a tape drive and changer device. This location
refers to the tape drive element of the library. It is normally only populated when the backup ap-
plication on the host is writing to or reading from the library.
• Mail slot row: This location refers to the slot that is used for importing and exporting data. It is
only populated:
• When the backup application on the host moves data into it for export to a tape drive attached
to the HP D2D Backup System. Once the export has been run successfully from the Web Inter-
face, the slot becomes empty again.
• Or when the Web Interface is used to import data from a tape drive attached to the HP D2D.
The backup application on the host is used to move the data back into a numbered slot and
the mail slot becomes empty again.
Numbered slot row: This slot is empty after a Delete operation or after the backup application has
•
moved data to the mail slot for export.
Once a mail slot or numbered slot is empty, a (Create)
to create a new, blank cartridge. See

To delete a cartridge

If the Used Size of a cartridge is Blank, you will be able to remove it.
Click on the (Delete)
remove it but only space that is occupied by unique data will be freed up.

To write protect a cartridge

Click Edit for the appropriate cartridge. Check the Write Protected check box for the cartridge. Your
backup application will not be able to write any more data to it.
118 The Web Management Interface
This defaults to the appropriate capacity for the drive emulation type selected
on the Devices tab. This value may be changed if the Used Size is Blank,
see below. The maximum value allowed is 1600 GB.
This is a check box that allows you to enable (checked) and disable
(unchecked) write protection, see below.
The (Delete) icon is displayed in Edit mode and is used to delete a
cartridge.
The (Create) icon is displayed next to an empty (blank) slot.
This drop-down list is displayed in Edit mode and allows you to move the
cartridge to an empty (blank) slot, mail slot or tape drive.
This tells you when the cartridge was last written to and is useful when
identifying data for copying or exporting.
"To create a
icon in the right-hand column. If the Used Size is not Blank, you can still
icon is available in the far right column
cartridge" on page 119.