Connecting The Hardware; Secure The Hp D2D To The Rack; Network And Power Connectors - HP StorageWorks D2D - Backup Systems User Manual

Figure 10 Secure the HP D2D to the rack
5. Using the holes provided in the rear rack rails, install tie wraps and route external cable as re-
quired.
NOTE:
For instructions on installing the Capacity Upgrade Kit, refer to the separate printed guide, supplied
with the product.

Connecting the hardware

1. Power connectors
3. LAN port 2 connector
Figure 11 Network and power connectors
1.
Use the supplied power cords to connect the HP D2D Backup System to the main power supply.
This HP-approved cord is appropriate for your specific geographic region.
The HP D2D Backup System has a redundant power supply. Make sure that both power cords
are connected.
For detailed safety information, see the Safety Guide on the HP StorageWorks D2D Backup
System CD-ROM.
2. LAN port 1 connector, must be connected
4. Fibre Channel card with optical ports
D2D Backup System HP D2D4112 35