Storage (Status) - HP StorageWorks D2D - Backup Systems User Manual

4. You will see the default virtual SMTP server. Right click on this and select Properties.
5. Select the Access Control tab and then select Authentication.
6.
The HP D2D Backup System may be used with one of the following settings:
• Anonymous Authentication (anyone can log on, you do not need to provide a Username and
Password when you configure email alerts)
• Basic Authentication, where a user name and password are required and should be provided
when you configure email alerts
NOTE:
Integrated Windows Authentication is not supported with the HP D2D Backup System. If
your SMTP Server requires this form of authentication and you have a spare network port,
we recommend that you create a new virtual SMTP server, allowing connection only to the
HP D2D Backup System. In this instance, you may lock the SMTP server to use only the HP
D2D Backup System's IP address and authentication may safely be set to anonymous for
the dedicated SMTP server.

Storage (Status)

This page contains three tabs that provides information about the Storage Pool, RAID and Shelves.
Shelf is used as a term within the D2D Web Management Interface to identify the physical storage
space provided by the HP D2D Backup System (Shelf 0) and the optional Capacity Upgrade Kit (Shelf
1). Each shelf contains 12 physical disks, but the 12th disk is an online spare disk. If one of the other
disks on that shelf fails, the online spare disk will be immediately used to replace it. The RAID rebuild
process occurs automatically. The failed disk should be replaced a soon as possible.
The Storage Pool refers to the overall storage space available on the HP D2D to hosts for storing data.
It consists of shelves and disks. Two fields are displayed at the top of each of the three tabs.
• Storage Pool Status: This is a summary of the overall health of the storage and RAID
124 The Web Management Interface