Operating Other Manufacturers' Equipment - JVC RX-ES1SL Instructions Manual

Operating other manufacturers' equipment
Set the mode selector to AUDIO/TV/VCR/DBS. ]
Changing the transmittablesignalsfor operatinga
DBStuner
! Press and hold DBS VII.
2 Press DBS.
3 Enter the manufacturer's code using buttons 1 - 9,
and O.
4 Release DBS _/I.
Now, you can perform the following operations on the DBS
tuner.
DBS Off: Turn on or off the DBS tuner.
After pressing DBS (source selecting button), you can perform
the following operations on the DBS tuner.
CHANNEL +/-: Change the channel numbers on the
DBS tuner.
1 - 9, 0: Select the channel numbers on the
DBS tuner.
5 Try to operate your DBS tuner by pressing
DBS Off.
When your DBS tuner turns on or off, you have entered the
correct code.
If more than one codes are listed for your brand of the DBS
tuner, try each one until the correct one is entered.
Manufacturers' codes for DBS tuner
Manufacturer Codes
G.I. 01 *
GEMINI 02
HAMLIN 03 - 06
JERROLD 07- 15
MACOM 16 - 18
MAGNAVOX 19
OAK 20 - 22
PANASONIC 23, 24
PHILIPS 25 - 30
PIONEER 31,32
S. ATLANTA 33 - 35
SAMSUNG 36
TOCOM 37
ZENITH 38, 39
ECHOSTAR 40
G.I. 41
HITACHI 42
HUGHES 43
PANASONIC 44
PRIMESTAR 45
RCA 46
SONY 47
TOSHIBA 48
* inifiat setting
CONTINUED ON THE NEXT PAGE
35