Settingautosurround--Auto Sr; Setting The Video Component Input Mode--Dvd Video/Dbsvideo - JVC RX-ES1SL Instructions Manual

Basic settings
n
SettingAutoSurround--AUTO SR
You can enjoy Surround mode simply by selecting the source (with
digitai input selected for that source).
Select "ON" when activating Auto Surround.
ON:
OFF*:
• if multi-channel signal comes in, an appropriate
Surround mode will be turned on.
• if Doiby Digital 2 channel or DTS 2 channel signal
including surround signai comes in, "PLil MOVIE" will
be selected.
• If Dolby Digital 2 channel or DTS 2 channel signal net
including surround signal comes in, "STEREO" will be
selected.
• If Linear PCM signal comes in, nothing will change.
The AUTO SR indicator lights up on the display.
Select this to deactivate Auto Surround.
* Initial setting
• This function does not take effect in the following cases:
- While playing an analog source, and
- While selecting "DGTL D.D." or "DGTL DTS" as the fixed digital
decode mode (see page 12).
• If Surround mode is automatically activated by Auto Surround, any
other Surround mode in use will be canceled temporarily. When the
multi-channel digital signal stops coming in, "PLII MOVIE" activates.
• If you press SURROUND with Auto Surround activated, Auto Surround
will be canceled temporarily for the currently selected source.
Auto Surround setting will be restored in the following cases:
- When you turn the receiver off and on,
- When you change the source,
- When you change the analog/digital input, and
- When you reset "AUTO SR" to "ON" again.
Setting the video component input
mode--DVD VIDEO/DBSVIDEO
When you use the component video inputs for the DVD player and/or
DBS tuner, you have to register the type of input terminals.
Without setting this correctly, you cannot view the correct input on the
TV.
S/C*: Select when connecting the video component to
the composite video or S-video input terminals.
COMP.: Select when connecting the video component to
the component video input terminals.
* Initial setting
2O