JVC RX-ES1SL Instructions Manual page 35

AV COMPU LINK remote control system
1. If you have already plugged your VCR, DVD
player, TV and this receiver into the AC outlets,
unplug their AC power cords first.
2. Connect your VCR, DVD player, TV and this
receiver, using the cords with the monaural mini-
plugs (not supplied).
•
See'CONNECTIONS 1"on the
previous
page.
3. Connect the audio input/output terminals on
VCR, DVD player, TV and this receiver using the
audio cords with RCA pin plugs.
•
Seepages7 to 9.
4. Connect the video input/output terminals on
VCR, DVD player, TV and this receiver, using the
cords with RCA pin plugs, S-video plug or
component video plugs.
•
See'CONNECTIONS 2 " on the
previous
page.
5. Plug the AC power cords of the components and
the receiver into the AC outlets.
6. When turning on theTV for the first time after the
AV COMPU LINK connection, turn theTV volume
to the minimum using the TV volume control on
the TV.
7. Turn on the connected components first, then
turn on this receiver.
• When turning on the VCR, use the remote control supplied with
this receiver (press VCR).
The AV COMPU LINK remote control system allows you to use the
five basic functions listed below.
Remotecontrolof the TV. DVD olaver, and VCR osinothis
remote control
See page 34 for details.
• Aim the remote control directly at the remote sensor on each
target component.
One-touch video olav
Simply by inserting a video cassette without its safety tab into the
VCR, you can enjoy the video playback without setting other switches
manually. The receiver automatically turns on and changes the source
to "VCR:'
The TV automatically turns on and changes the input mode to the
appropriate position so that you can view the playback picture.
When you insert a video cassette with its safety tab, press the play
(_-) button on the VCR or on the remote control. So, you can get fhe
same result.
One-touch DVD olav
Simply by starting playback on the DVD player, you can enjoy the
DVD playback without setting other switches manually.
• When the DVD player is connected through the analog input jacks
on this receiver (and analog input is selected), the receiver
automatically turns on and changes the source to "DVD" or "DVD
MULTI."
• When the DVD player is connected through fhe digital input
terminal on this receiver (and digital input is selected), the receiver
automatically turns on and changes the source to "DVD:'
The TV automatically turns on and changes the input mode to the
appropriate position so that you can view the playback picture.
Automaticselection of TV's input mode
• When you select "TV" as the source to play on the receiver, the TV
automatically changes the input mode to the TV tuner so that you
can watch TV.
• When you select "DVD,""DVD MULTI,""VCR" or "DBS" as the source
to play on the receiver, the TV automatically changes the input
mode to the appropriate position (either Video Input 1 or Video Input
2) so that you can view the playback picture.
This function does not work when you connect this receiver and the
TV with the AV COMPU LINK using the TV's AV COMPU LINK EX
terminal In this case, reconnect the TV referring to case 1 or case 2
on page 32.
Automaticoower On/Off
The TV, VCR, and DVD player turn on and off along with the receiver.
When you turn on the receiver;
• If the previously selected source is "VCR," the TV and VCR will turn
on automatically.
• If the previously selected source is "DVD" or "DVD MULTI;' the TV
and DVD player wilt turn on automatically.
• If the previously selected source is "TV" or "DBS," only the TV will
turn on automatically.
When you turn off the receiver, the TV, VCR and the DVD player will
turn off.
If you turn off the receiver while recording on the VCR, the VCR will
not turn off, but continue recording.
33