Operating Other Manufacturers' Equipment; Changing The Preset Signal Codes - JVC RX-DV3SL Instructions Manual

Operating Other Manufacturers' Equipment

This remote control supplied with the unit can transmit control signals for other manufacturers' TVs, DBS tuners, and VCRs.
By changing the transmittable signals from preset ones to other manufacturers', you can operate other manufacturers' components using this
remote control.

Changing the Preset Signal Codes

To operate other manufacturers' equipment using this remote
control
• Aim the remote control directly at the remote sensor on each
equipment.
• To operate a source with the remote control, the source must be
selected using source selecting buttons on the remote control.
• Refer also to the manuals supplied with your equipment.
7
To change the transmittable signals for
operating other manufacturers' TV
1. Press and hold
STANDBY/ON TV.
2. Press TV.
3. Enter the manufacturer's code
using the number buttons (1–9, 0).
See the right to find the code.
4. Release STANDBY/ON TV.
You can perform the following operations on the TV:
STANDBY/ON TV : Turns on or off the TV.
TV VOL + or – : Adjusts the volume.
TV/VIDEO : Sets the input mode (either TV or
After pressing TV, you can perform the following operations on
a TV:
TV/DBS CH + or – : Changes the channels.
1 – 9, 0, 100+ : Selects the channels.
61
STANDBY/ON
DBS VCR TV
TV TAPE CDR
DBS VCR
EFFECT CENTER
1 2
TEST REAR·L
4 5
SURR ON/OFF REAR·R
7 8
–
SURR MODE SUBWOOFER
10/0 +10
100+
VIDEO).
For channel number 5, press 5.
For channel number 10, press 1, then 0.
For channel number 23, press 2, then 3.
For channel number 135, press 100+,
3, then 5.
TV RETURN will function as the
ENTER button if your equipment
requires pressing ENTER after
selecting a channel number.
Notes:
• Refer also to the manual supplied with your TV.
• All the functions listed on the left may not be assigned to the
buttons for some TVs.
• If you cannot change the channels of some TVs by pressing
the number buttons, press TV/DBS CH + or – for changing the
channels.
5. Try to operate your TV by pressing
STANDBY/ON TV.
When your TV turns on or off, you have entered the correct
code.
If there are more than one code listed for your brand of TV,
try each one until the correct one is entered.
AUDIO
Manufactures' codes for TV
Manufacturer
JVC
FM/AM
Akai
DVD
Blaupunkt
Fisher
Grundig
Hitachi
3
Iraddio
6 Itt/Nokia
Loewe
9
Magnavox
+
Mets
Mitsubishi
Mivar
Nordmende
Okano
Panasonic
Philips
Quelle
RCA/PROSC
SABA
Samsung
Sanyo
Schneider
Sharp
Sony
Telefunken
Thomson
Toshiba
Zenith
*"00" is the initial JVC code.
Note:
• Manufacturers' codes are subject to change without notice. If
they are changed, this remote control cannot operate the
equipment.
Codes
00*, 02, 13, 14, 47, 74
01, 02
03, 04
01, 05
03, 06, 07
08 – 10, 49
02
11, 12
06, 15, 16
08, 17, 49
50 – 53
08, 18 – 20
21
22, 23
15
24 – 27, 76
15, 17, 28, 75
52 – 67
08, 24, 29 – 31, 48
32, 33, 68 – 70
06, 08, 16, 34, 35, 49
01, 05
02, 15, 36
37, 38, 77
39
40 – 42, 69
71, 72
37, 43, 44
45, 46