Aboutrelationsbetweenspeakerlayout And Surround/Dsp Modes; Usingsurround Modes - JVC RX-ES1SL Instructions Manual

Creating realistic sound fields
Aboutrelationsbetweenspeakerlayout
and Surround/DSP modes
Available Surround/DSP modes will vary depending on how many
speakers are used with this receiver.
Make sure that you have set the speakers information correctly
(see pages 15 to 18).
• If onty front speakers are connected, you cannot use the Surround
modes.
• If surround speakers are not connected, you cannot use DSP
modes.
When multi-channel digital software such as Dolby Digital or DTS
Digital Surround is played back, the appropriate multichannel
Surround mode is automatically activated ("DOLBY D" or "DTS") by
pressing SURROUND (with the digital input mode selected).
• For Doiby Digital 2 channel software, you can select "PLII MUSIC"
or "PLII MOVIE" by pressing SURROUND.
• For more details, see "Available Surround/DSP modes for each
input signal" on page 26.
When connecting 5 speakers and 4 speakers
Available Surround modes:
PLII MOVIE (Pro Logic II MOVIE)
PLII MUSIC (Pro Logic II MUSIC)
Available DSP modes:
LIVE CLUB
DANCE CLUB
HALL
PAVILION
ALL CH ST. (All Channel Stereo)
When connecting 3 speakers
Available Surround modes:
PLII MOVIE (Pro Logic II MOVIE)
PLII MUSIC (Pro Logic II MUSIC)
UsingSurround modes
Once you have adjusted the Surround modes, the adjustment is
memorized for each source.
• If you set the speaker information using Smart Surround Setup (see
page 15), you do not have to adjust speaker output level.
When operating this receiver using the remote
control, always set the mode selector to
AUDIO/TV/VCB/DBS.
Before you start, remember...
Make sure that you have set the speaker information correctly (see
pages 15to 18).
Fromthe remote control:
It wifl be convenient for you to use the
remote control for the sound
adjustments, since you can make
adjustments from your listening point,
and use the test signal.
• For selecting Panorama control for
Pro Logic II Music, use the buttons
on the front panel.
1 Select and play software you like.
If "AUTO SR (Auto Surround)" is set to "ON"
Playing a digital source automatically activates an appropriate
Surround mode. (See page 20.) _ Go to step 3.
2 Press SURROUND to select an appropriate
Surround mode.
• Each time you press the button, the Surround/DSP modes
change as follows:
When playing back multi-channel digital software such as
DoIby Digital or DTS Digital Surround:
L C
-- m-- . ...........
........ • ,..
[ DOLBY D or DTS _ STEREO (surr0und/DsP off) ]
When playing back 2 channel digital software such as
DoIby Digital or DTS Digital Surround:
PLii MOVIE _ PLII MUSIC /
_sTEREo iSurr0und/BSP off)_ J
When playing back any software other than above:
When "AUTO SR (Auto Surround)" is turned "ON" (see page 20),
Surround mode is automatically activated when you select and start
playing back a multi-channel digital source.
CONTINUED ONTHENEXTPAGE
27