Connecting An Av Component In A Separate Room (Multi-Zone Connection); Connecting A Tv (Zone 2) - Onkyo TX-RZ830 Instruction Manual

Connecting an AV Component in a Separate Room (Multi-zone Connection)

Connecting a TV (ZONE 2)

a
a HDMI cable
Contents Connections
≫
While a disc is played on a Blu-ray Disc player in the main room (where this unit
is located), you can play the video and audio of the same Blu-ray Disc player or
another AV component on the TV equipped with an HDMI IN jack in a separate
room (ZONE 2). The TV in the separate room can play only the video of devices
connected to the HDMI IN1 to IN3 jacks of this unit.
• The audio from externally connected AV components can be output only when
the signal is 2ch PCM audio. It may also be necessary to convert the audio
output of the AV component to PCM output.
Setup
• When video and audio via HDMI input are output to ZONE 2, set "1. Input/
Output Assign" - "TV Out / OSD" - "Zone2 HDMI" (
Setup menu.
TV
66
Playback
≫
Front Panel≫ Rear Panel≫ Remote≫
Setup
≫ ≫
p128) to "Use" on the