Connections; Connecting The Av Receiver; Connecting Your Speakers - Onkyo TX-NR929 Owner's Manual

Connections

Connecting the AV
Receiver

Connecting Your Speakers

Front speakers
Center speaker
Surround speakers
Subwoofer(s)
Surround back speakers
Front high speakers
Front wide speakers
Speaker Configuration
The following table indicates the channels you should
use depending on the number of speakers that you
have.
No matter how many speakers you use, a powered
subwoofer is recommended for a really powerful and
solid bass.
To get the best from your surround sound system,
you need to set the speaker settings automatically
(➔ page 28) or manually (➔ page
Number of 2 3 4 5 6 7 7 7 8 8 9 9 9 10 11
speakers
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Front
speakers
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Center
speaker
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Surround
speakers
✔ ✔ ✔
Surround
back speaker
✔
Surround
back
speakers
✔ ✔
Front high
speakers
✔
Front wide
speakers
Speaker Configuration
5.1-channel:
7.1-channel: +
7.1-channel: +
7.1-channel: +
9.1-channel: +
9.1-channel: +
9.1-channel: +
11.1-channel : +
*1
En-14
*1 By using a combination of the built-in power amplifier for
9-channel and an external power amplifier for 2-channel,
you can enjoy up to 11.1-channel playback.
Using Powered Subwoofers
65).
1/3 of wall
position
To find the best position for your subwoofer, while
playing a movie or some music with good bass,
experiment by placing your subwoofer at various
positions within the room, and choose the one that
✔
provides the most satisfying results.
✔ ✔ ✔
You can connect the powered subwoofer with two
SUBWOOFER PRE OUT jacks respectively.
The same signal is output from each jack.
✔ ✔ ✔ ✔
Tip
✔ ✔ ✔ ✔ ✔ • If your subwoofer is unpowered and you're using an
external amplifier, connect the subwoofer pre out jack to an
input on the amplifier.
+
+
+
+ +

Connections

Corner
position