How To Empty; To Clean Filters; Solution Tank - Hoover FloorMate SpinScrub 800 Manual

"x
J
How to empty
Turn cleaner off and disconnect from electrical outlet.
Although not necessary for satisfacto_\y performance, it
is recommended that the recovery tank be emptied after
dry vacuuming and before wet operation.
Check the solution tank also. It may need to be refilled
at this time.
To remove tank, press down on release button (B)
pull tank straight out.
Remove tank lid (C). Empty tank.
./
To clean filters
The tank lid contains a washable, reusable filter. Clean
this pleated filter" when suction is low or reduced.
Turn cleaner OFF and disconnect from electrical outlet.
Remove recovery tank and lid (Figs. 27 & 28).
filter" lid (A), then remove filter" (B).
Remove loose debris from filter by tapping the filter or
gently brushing using your hand. The filter" may also be
rinsed for additional cleaning. Allow filter to air" dry
between uses.
Reposition filter.
Replace filter" lid. Press down firmly until snapped
place.
Continued _ 11