Hoover FloorMate SpinScrub 800 Manual page 7

F
E
G
H
Store hose;tools and accessories
To store bose: Place the hose grip (D) into
(E) on back of caddy. Pull hose up and
press into cut-out area (F). Continue wrap-
ping hose down, underneath tongue (G), and
back tap, pressing into second cut-out area (H).
Place hose end (I) into slot (J) on back of caddy.
Place floor swivel tool (K), grout tool (L), brush
assembly (M), telescoping wand (N) and deter-
gent (0) into caddy as shown.
Raise tapper handle (A) to upright
position until it locks in place.
Press tapper handle release button
'B) to fold handle to storage position.
\
A
J
Step on pedal (A) to lower handle
to operating position. Handle does
not lock into a single position, but
"floats" to allow convenient operation.
Push switch (A) once to turn cleaner
Push switch again to turn
cleaner OFF.