Stair Cleaning; How To Clean Tools; Maintenance; Dirt Cup Empty - Hoover UH72003 Owner's Manual

Table of Contents

Advertisement

Available languages

Available languages

sTaIr CleanInG

3.4 Use the Hose and Turbo Tool (Tool varies per model) for stair cleaning.
CauTIOn
!
Use extra care when cleaning on stairs. To avoid personal injury or
damage, and to prevent the cleaner from falling, always place cleaner at
bottom of stairs on floor. Do not place cleaner on stairs or furniture, as it
may result in injury or damage. When using tools, always ensure handle
is in the upright position.

HOw TO Clean TOOls

To clean Hose and Turbo Tool, wipe with a damp cloth. DO NOT submerge in water.
Other cleaning tools may be washed in warm water with a detergent. Rinse and air dry 24 hours before
using.

4. MaInTenanCe

Any other servicing should be done by an authorized service representative.
If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, take
it to a service center prior to continuing use.
Familiarize yourself with these home maintenance tasks as proper use and care of your vacuum will ensure
continued cleaning effectiveness.
nOTICe
!
A Thermal Protector has been designed into your cleaner to protect it from overheating. When the
thermal protector activates the cleaner will stop running.
If this happens proceed as follows:
1. Turn cleaner OFF and unplug it from the electrical outlet.
2. Empty dirt cup.
3. Inspect the nozzle inlet, hose connector, hose, dirt cup inlet, foam filter, rinsable filter, and
HEPA filter. Clear obstructions if present.
4. When cleaner is unplugged and motor cools for 30 minutes, the thermal protector will deactivate
and cleaning may continue.
If the thermal protector continues to activate after following the above steps, your cleaner
needs servicing.
DIrT CuP
when to empty
4.1 To maintain optimal performance, empty the dirt cup before the dirt cup
reaches the max line (A). Turn vacuum off, unplug and place the vacuum in the
upright position before removing the dirt cup.
warnInG
!
To reduce the risk of personal injury - Unplug before cleaning or servic-
ing. Do not use vacuum without dirt cup or filters in place.
Very fine materials, such as face powder or cornstarch, may seal the filter
and cause a reduction in performance. When using the vacuum for this
type of dust, empty the cup and clean the filters often.
Actual model may vary from images shown.
3.4
!
!
4.1
!
A
8

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents