Hoover FloorMate SpinScrub 800 Manual page 10

If rubber ring (D) on cap has become dislodged, reposi-
it with uneven side against ledge (E) as shown.
Replace cap. Rotate cap clockwise until it locks in place.
must be locked in place for proper performance
and to prevent leaking.
J
Slide tank straight into position until latch snaps in
place.
Recovery (lower) tank
Automatic shut-off
An automatic suction shut-off is built into the recovery
tank to prevent the tank from overflowing.
When the shut-off activates, the cleaner will not pick up
debris and the sound of the motor will change. The recov-
ery tank is full and must be emptied.
10