Assemble Handle; Install Brushes And Nozzle - Hoover FloorMate SpinScrub 800 Manual

Assemble handle
Rotate bottom handle support (A) up
the upright position until a snap is
\
/
%lt.
Align control rod (B) on upper
handle (C) with slot in bottom
aandle support (D).
Push upper handle (C) down until it
is snapped in place.
Install brushes and nozzle
To install brushes, place handle in
pright position. Tilt cleaner back so
that it rests on the floor.
Align post (A) on brush block with hole
(B) on bottom of cleaner. Turn brushes
slightly until post fits easily into hole.
Continued _ 5