How To Use; On-Off Switch; Handle Release Pedal; Transporting - Hoover Floormate Deluxe FH40160 Series Owner's Manual

HANDLE RELEASE PEDAL

4.1
A

TRANSPORTING

4.3
To move your cleaner
from room to room, put
handle in upright
position, tilt cleaner
back on rear wheels
and push forward.

Dirty Water Tank

(left side when facing unit)
When to Empty
An automatic suction shut-off is built into the dirty
water tank to prevent the tank from overflowing.
When the shut-off activates, the cleaner will not pick
up water or debris and the sound of the motor will
change. The dirty water tank is full and must be
emptied.

How to Empty

5.1 To remove tank, press down on release button
(A) and pull tank straight out.
5.2 Release tabs (B & C) on each side of the dirty
water tank to unlock the top portion of the tank.

4. HOW TO USE

Step on pedal (A) to
lower handle
operating position.
Handle does not lock
into a single position,
but "floats" to allow
convenient operation.
4.4
B
The cleaner may also
be lifted using the carry
handle (B) on front of
cleaner.
5. HOW TO EMPTY
ON/OFF SWITCH
4.2
to
CORD STORAGE
4.5
Wrap the
clockwise around the
two cord handle hooks
(C). For convenient
storage, attach the plug
end to the cord.
WARNING
!
To reduce the risk of personal injury, unplug
before cleaning or servicing. Do not use
cleaner without tank in place.
5.1
A
9
Push switch (A) once to
turn cleaner ON. Push
A
switch again to turn
cleaner OFF.
C
cord
5.2
B
!
C