Standard Flush Door - Regency Sunrise U32SE-NG5 Owners & Installation Manual

The standard fl ush door comes with a black frame. To install the frame,
simply hook the top door fl ange onto the top of the unit and swing the
door towards the unit, diagram 1. Be careful that the glass gasket does
not roll up; there must be a gap between the gasket and the door lip to
ensure that the door sits securely on the unit. Diagram 2.
Use the hook to pull the spring out until you can put the hook into the slot
on the bottom door bracket. Repeat for 2nd spring. See diagram 3.
Diagram 1b
U32SE-5 FPI Direct Vent Gas Insert

STANDARD FLUSH DOOR

Diagram 1a
Diagram 2
To remove the fl ush door, reverse the above steps.
IMPORTANT NOTE: The chain must rest on TOP of the gas inlet
pipe never under it.
Diagram 3
INSTALLATION
25