Scanning Using Wsd; Setting Up A Wsd Port - Epson EcoTank Pro M15180 Series User Manual

Scanning
>

Scanning Using WSD

Scanning Using WSD

Note:
❏ This feature is only available for computers running Windows 10/Windows 8.1/Windows 8/Windows 7/Windows Vista.
❏ If you are using Windows 7/Windows Vista, you need to setup your computer in advance using this feature.
"Setting Up a WSD Port" on page 110
1. Place the originals.
"Placing Originals" on page 37
2. Select Scan > WSD on the control panel.
3. Select a computer.
4. Tap
x
.

Setting Up a WSD Port

This section explains how to set up a WSD port for Windows 7/Windows Vista.
Note:
For Windows 10/Windows 8.1/Windows 8, the WSD port is set up automatically.
The following is necessary to set up a WSD port.
❏ The printer and the computer are connected to the network.
❏ The printer driver is installed on the computer.
1. Turn the printer on.
2. Click start, and then click Network on the computer.
3. Right-click the printer, and then click Install.
Click Continue when the User Account Control screen is displayed.
>
Setting Up a WSD Port
110