Setting Time Zone; Changing Management Code - Kyocera TASKalfa 620 Operation Manual

System Settings

Setting Time Zone

Specifies the time zone in reference to Greenwich Mean Time.
1
Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default
Screen on page 3-20.)
2 Press [ ] or [ ] to select Time Zone
and press [Change #].
3
Press [+] and [-] to select the time zone.
4 Press [Close]. The touch panel will return to the Machine Default screen.

Changing Management Code

You can change the management code.
IMPORTANT: Be sure to make a note of the management code when it is changed.
NOTE: The default management code is 6200 for the 62 cpm model and 8200 for the 82 cpm
model.
The new management code must be a number comprising of four digits from 0000 to 9999.
When installing the optional security kit, enter the eight-digit management code. By default, the
management code is 62006200 for 62 cpm model and 82008200 for 82 cpm model. The new
management code must be a number comprising of eight digits from 00000000 to 99999999.
Avoid using an administrator code that is easily determined, such as '11111111' or '12345678'.
Enter the following menu to make changes.
1 Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default
Screen on page 3-20.)
3-32
- Default Settings for Copying
- Common Default Settings
- Job Accounting
- Weekly Timer
- Setting Document Management Defaults
- Hard Disk Management
- Printing Reports
System Menu / Counter
Machine Default
Default menu
Select Copy output tray Tray A
Key sound ON /OFF On
Silent Mode Off
Date/Time 10/10/08 07:00
Time Zone GMT +09:00
System Menu
Time Zone
GMT+09: 00
System Menu - Machine Default
Setting mode
Change #
Back