.
System Menu/
Counter
or
System Setting
Enter
or
Network Setting
Enter
or
TCP/IP Setting
Enter
or
Default Gateway
Enter
Date and Time Settings
System Menu/
Counter
or
Date/Timer Set
Enter
or
Time Zone
Enter
OPERATION GUIDE
Registering the Default Gateway
1
Access Default Gateway.
If you are unsure how to use this route map refer to Accessing Menu Items on
page 3-3.
2
Use the numeric keys to enter each segment of the Default Gateway in turn,
pressing
or [*.] to move between segments.
3
Press Enter on completion.
If you make an error in entering a portion of the Default Gateway, press
return to the previous block of digits and re-enter the correct number.
4
When you complete all of the network setting, press right Select. The message
display returns to the basic screen.
Setting the Time Zone
You can also make this setting using COMMAND CENTER. For details on
COMMAND CENTER, refer to the Advanced Operation Guide.
1
Access Time Zone.
If you are unsure how to use this route map refer to Accessing Menu Items on
page 3-3.
2
Press
or
3
Press Enter. The message display shows Completed and returns to the Date/
Timer Set. screen.
4
Press right Select. The message display returns to the basic screen.
to select the time zone that you are in.
Preparations
to
3-5