Correcting Black Line - Kyocera TASKalfa 620 Operation Manual

4
Press [Close]. The touch panel will return to the Copy Default screen.

Correcting Black Line

Set Fine Black Line correction to reduce the black lines (dragged stains not appearing on the
original) that may occur when copying using the document processor.
1
Access the Copy Default screen. (For instructions, refer to Accessing the Copy Default Screen on
page 3-3.)
2 Press [ ] or [ ] to select Correcting
Black Line and press [Change #].
3 Select [Off], [On (Low)] or [On (High)].
NOTE: When suppressing black
streaks, select [On (Low)]. Select [On
(High)] only when the black streaks are
not suppressed with the Low setting.
When fine black line correction is
enabled, the ability to reproduce fine
text characters is reduced. For normal
usage, the default setting ([Off]) is
recommended.
4
Press [Close]. The touch panel will return to the Copy Default screen.
Paper Selection
Specifies whether the copy paper is automatically selected according to the size of the original
document or the copy paper in the default cassette is forcibly selected.
1
Access the Copy Default screen. (For instructions, refer to Accessing the Copy Default Screen on
page 3-3.)
2 Press [ ] or [ ] to select Paper
Selection and press [Change #].
3 Choose [APS (automatic paper
selection)] or [Default cassette].
System Menu / Counter
Copy Default
Default menu
Original Image Text + Photo
EcoPrint Off
Background Density Adj . Standard
Thin Line adjustment 4
Correcting Black Line Off
System Menu
Correcting Black Line
Suppresses black streaks that may appear on images.
This may deteriorate the way fine lines are reproduced .
Off
On
(Low)
On
(High)
System Menu - Copy Default
System Menu / Counter
Copy Default
Default menu
EcoPrint Off
Background Density Adj . Standard
Thin Line adjustment 4
Correcting Black Line Off
Paper Selection APS
System Menu
Paper Selection
Set auto paper selection mode .
APS
Default
cassette
System Menu - Copy Default
System Settings
Setting mode
Change #
Back
Setting mode
Change #
Back
3-7