Overview; Precaution; Tools - Epson EPL N2700 Service Manual

EPSON EPL-N2700

4.1 Overview

4.1.1 Precaution

Observe the following instruction well before starting servicing.


Before servicing, turn the printer power off and
unplug the power code from the AC socket.


Before removing the fuser and nearby parts, turn the
printer off and wait for at least 30 minutes to lower the
fuser temperature.


Since the printer weighs 30 Kg, be sure to carry the
printer with 2 people.
Before starting servicing, make sure the following
points:


Interface cable is disconnected from the back of the
printer.


No option is installed on the printer.


Wear the wrist strap to release static electricity so
you can avoid damaging static electricity sensitive
components.
Chapter 4 Disassembly/Assembly

4.1.2 Tools

The tools used to disassemble/assemble this printer are as listed below:
Table 4-1. Tool List
Name Availability
*1
Phillips screw driver A
Phillips screw driver A
Standard driver A
Tweezers A
Pillars A
*1:A = Available on the market
Rev. A
Code
B743800100
B743800500
B743000100
B641000100
B740400100
88