EPL-N2700
Figure 1-1. Exterior View of the EPL-N2700
Product Description
1.2 Basic Specifications
This section describes the basic specifications of the EPL-N2700.
1.2.1 Controller Specifications
CPU
VR4310 / 166MHz
RAM
Standard
Optional
ROM
Font:
Program:
Expansion ROM:
*1. 8MB (TBD) is allocated for the program area. The RAM Check at
startup shows the attached memory size, while the status sheet
shows the size with the program code size deducted as well as the
attached memory.
*2. Not mentioned in any catalog nor specifications, since they are
hardly distributed.
*3. Availability of 256MB RAM, which may be distributed in future, will
be determined after the printer is in market.
Basic Specifications
*1
16MB (on-board)
*2
*2
8MB
/16MB
/32MB/64MB/128MB/
*3
256MB
(SDRAM type,1 slot)
Can be expanded up to 256MB.
2Mbytes (on-board)
4Mbytes (on Flash ROM-DIMM board)
3 ROM-DIMM slots (Can be removed/
installed at power on only)
Available for NLSP FONT DIMM and
PostScript 3 DIMM
Revision A
13