Timing Roller Removal - Epson EPL N2700 Service Manual

EPSON EPL-N2700

4.2.4.5 Timing Roller Removal

1. Remove the Transfer Unit. (See Section 4.2.4.2.)
2. Put up the transfer front guide plate. (See Section 4.2.4.1.)
3. Remove the Timing Clutch. (See Section 4.2.4.4.)
4. Release the hook securing the Guide Bar to the Holder Assembly
and remove the paper dust remove filter from the Holder Assembly.
Chapter 4 Disassembly/Assembly
5. Remove two tension springs securing the bushing for the Timing
Driven Roller to the Holder Assembly.
6. Remove two E-rings (9140) from the right and left ends of the
Timing Sub Roller. Then remove one gear (13T), two busings, and
the Timing Driven Roller.
7. Remove E-rings (9140) from the right and left ends of the Timing
Drive Roller. Then remove one gear (18T), two bushings, and the
Timing Drive Roller.
Figure 4-14. Timing Roller Removal
Rev. A
98