Paper Size Sensor Removal; Top Cover Removal - Epson EPL N2700 Service Manual

EPSON EPL-N2700

4.2.10 Paper Size Sensor Removal

1. Remove the Rear Cover. (See Section 4.2.6.)
2. Remove the MP Cassette.
3. Remove one screw (3501) securing the paper size sensor bracket
to the printer frame, and remove the plate along with the sensor.
4. Release the hook fixing the sensor to the holder and remove the
sensor.
5. Disconnect the harness from the connector on the sensor.
Paper Size Sensor
Bracket
Figure 4-21. Paper Size Sensor Removal
Chapter 4 Disassembly/Assembly
Printer Frame

4.2.11 Top Cover Removal

1. Remove two screws (3541) securing the Top Cover to the printer
through the left cover.
2. Lift up the left edge of the Top Cover and remove the Top Cover.
Top Cover
Left Cover
Figure 4-22. Top Cover Removal
Rev. A
102