Overview - Epson SC-F2200 Series Printing Manual

DTF Film Printing Guide

Overview

When using a model that supports DTF film printing, you can print on commercially available DTF film as well as
T-shirts and other media. The following illustration shows the process of printing a job on film to completing the
final printed product (such as a T-shirt).
Work Item
A
Creating/Sending Jobs
B
Loading the Film
C
Printing
D
Post-processing
When performing DTF film printing, you need to use additional tools to those used when printing directly onto
media. See the next section for more details.
Introduction
Summary
Send a print job for film printing created in Garment Creator 2 to the
printer.
See the Garment Creator 2 help for more details.
Attach the platen to the printer, and then load the film. You cannot use a
grip pad covered platen.
"Loading the Film" on page 7
U
Confirm that the job has been received and the x button on the printer is
lit before you start printing.
"Start Printing" on page 9
U
Perform post-processing for the printed film and media in the following
order to complete the printed product.
Place the film in a tray or other suitable container, apply the powder,
and then heat it in an oven, and so on.
Transfer images from the film to the media with a heat press.
Peel off the film and fix the ink using a heat press.
"Post-processing" on page 10
U
5