Ethernet I/F - Epson EPL N2700 Service Manual

EPL-N2700

1.3.4 Ethernet I/F

I/F type: 10BaseT, 100BaseT, Half Duplex, Full
Duplex (Switched at power on)


Communication protocol:

IPX/SPX (IPX, SPX, NCP, RIP, SAP, PrintServer,
RemotePrinter, NDS, SNMP)

NetBIOS (SMB)
NetBEUI

TCP/IP (IP, UDP, TCP, LPR, FTP, TELNET, APR, ICMP,
RARP, BOOTP, DHCP, SNMP, HTTP)

AppleTalk (ELAP, DDP, ATP, PAP, AARP, NBP, ZIP, RTMP)
(When AppleTalk is used, items such as printer name must be
set on the Web browser. EPSON Net and EPSON Net2 can not
be used.)


Connector: RJ45


Applicable cable: 2-pair category 3, 4 or 5 UTP (10BaseT,
100BaseT)
(To conforms with ECC Class B, EN55022
Class B, VCCI Class B, a shielded cable must
be used.) (TBD)


Pin assignment: See Table 1-20.
Product Description External Interface Specifications
Table 1-20. Ethernet I\F Pin Assignment
Pin Signal Name
1 Tx+
2 Tx-
3 Rx+
4 N.C.
5 N.C.
6 Rx-
7 N.C.
8 N.C.
Revision A
I/O
O
O
I
I
30