Epson EPL N2700 Service Manual page 111

EPSON EPL-N2700
12. Remove four screws (3501) securing the Left Reinforce Plate to the
printer frame and PH Plate and remove the Left Reinforce Plate.
13. Remove four screws (3501) securing the PH Plate from the front
and rear sides of the printer frame.
14. Remove one screw (3501) securing the ground wire from the
Printhead Unit to the PH Plate, and remove the ground wire.
15. Remove four screws (3520) securing the Printhead Unit to the PH
Plate and remove the Printhead Unit.
Figure 4-33. PH Plate Removal
Chapter 4 Disassembly/Assembly
Rev. A
111