Epson EPL N2700 Service Manual page 122

EPSON EPL-N2700
11. Remove one retaining ring (9302) fixing the bushing to the bracket
for the Gear (49T) and remove the bushing.
12. Release the harness from the clamp attached to the bracket for the
Gear (49T).
13. Remove the harness for the MP Cassette Paper Take-up Solenoid
(SL1).
14. Remove one retaining ring (9301) from the MP Cassette Paper
Take-up Roller Drive Shaft and remove the bushing.
Figure 4-56. Drive Unit Removal
Chapter 4 Disassembly/Assembly
15. Inserting a hand from the bottom of the printer, remove one C-clip
attached to the Transport Transmission Gear, and remove the
Transport Transmission Gear and the bushing from the Driver Unit.
16. Disconnect the harness for the MP Cassette Set Sensor (PC6) from
the connector on the sensor.
17. Remove nine screws (3708) securing the Drive Unit to the printer
frame, and remove the Drive unit.
Figure 4-57. Drive Unit Screw Location
Rev. A
Screw
122