Connecting The Usb/Ethernet Cable - Epson TM-C710 Technical Reference Manual

Connecting the USB/Ethernet Cable

For the USB interface model, connect the USB cable, for the Ethernet interface model, connect the
Ethernet cable to the printer.
 Direct connection to an aerial LAN cable located outside may cause induced lightning to
 Do not plug an ordinary telephone line into the Ethernet connector.
Make sure the power is turned off for both the printer and the host
1
computer.
For the USB interface model, connect the USB cable to the connector.
2
For the Ethernet interface model, connect the Ethernet cable to the
connector until it clicks.
USB interface model
Secure the cable with the hook.
3
USB interface model
damage devices. When you use such cables, connect via devices that protect against surges.
Chapter 2 Setup
Ethernet interface model
Ethernet interface model
2
37