Installing The Hdd - Toshiba TECRA S1 Maintenance Manual

4 Replacement Procedures

Installing the HDD

Install the HDD according to the following procedures and Figures 4-12 and 4-13.
CAUTION: To avoid damage, always hold the HDD only by its sides.
1. Attach the HDD chassis and connector to the HDD pack.
2. Secure the HDD and its chassis with the four M3x4 black flat-head screws.
CAUTION: When installing the HDD pack into the computer, do not press the center of
the HDD pack to prevent the HDD bracket from being distorted. Always hold the HDD
pack by its sides.
3. Install the HDD pack into the correct position in the computer. Connect the HDD
pack to the computer, holding the HDD pack by its sides.
4. Insert the HDD pack.
5. Secure the HDD cover with one M2.5x4 black flat-head screw.
4-26
4.4 HDD
TECRA S1 Maintenance Manual