4.9 Keyboard
4.9
Keyboard
Removing the Keyboard
Remove the keyboard according to the following procedures and Figures 4-23, 4-24, and
4-25.
CAUTION: To avoid fingernail damage, do not pull out the switch cover by clamping it
with your fingernails.
1. Turn the computer upside down.
2. Remove two M2.5x12 black bind screws.
3. Restore the normal computer placement and open the display panel. Remove the
switch cover.
4. Release the following 6 latches on the switch cover, in that order:
- Three bottom latches
- One latch on the left and right sides
- One middle latches
TECRA S1 Maintenance Manual
Figure 4-23 Removing the switch cover
4 Replacement Procedures
4-39